Coming from the far East, INO has finally arrived in USA. New belt-shop open in Buffalo, NY!
Pure 20 Green Oval ER
Request Sample
Pure 20 Green Oval ER

Pure 20 Green Oval ER

Description

BU/2 ER12 00+S10 PU dark Green AS

Article

10014

General Characteristics

2 ply green TPU, inverted oval top cover. Extra rigid. Antistatic. Oil and fat resistant

Print Data sheet
Request Sample

Technical Information

Max Production Width
118.11 in 3000.00 mm
Total Thickness
0.12 in 3.10 mm
Mass
0.59 lb/ft2 2.90 kg/m2
Tensile force at 1% elongation
After Relaxation - ref. ISO 21181
68.40 lbf/in 12.00 N/mm
Working Temp.
-4/+194 F -20/+90 C
Flexion (A)
2.36 in 60.00 mm
Counter Flexion (B)
3.54 in 90.00 mm
Coefficient of friction
Bottom side - Steel
0.20

Special Features

Antistatic ISO 284 & 21178
Oil & Fat Resistant
Abrasion Resistant
Pure 20 Green Oval ER Pure 20 Green Oval ER

Top side (Carrying)

Material
PU
Color
Green
Thickness
0.05 in 1.20 mm
Hardness
90 Shore A | ISO 868
Surface
Treadmill

Tension member

Interply
PU
Fabric
Polyester Rigid
Plies
2
Weft
Rigid

Bottom side (Pulley)

Material
Fabric
Color
Fabric
Thickness
0.00 in 0.00 mm
Hardness
- Shore A | ISO 868
Surface
Impregnated

Splice Instructions

Preferred method
FOF (Finger Over Finger)

Fingers are punched into the ends to be joined, and then tacked together and welded under pressure and heat.
This method is especially suitable for single-layered belts

  • Length of the joint 90mm
  • Length of the fingers 90mm
  • Width of the fingers 10mm

160 C 320 F 160 C 320 F 7.26 PSI 0.50 Bars 2.00 min
160 C 320 F C F 29.03 PSI 2.00 Bars No
 

Mechanical Fasteners

Recommended Mechanical Fasteners (at smallest pulley diameter)

Staple Lacing

Staple Lacing

Recommendation at belt minimum pulley diameter:
RS62
APF Fasteners

APF Fasteners

Recommendation at belt minimum pulley diameter:
Alligator

Alligator

Recommendation at belt minimum pulley diameter:
7
Clipper Lacing

Clipper Lacing

Recommendation at belt minimum pulley diameter:
25 LP, 30P, UX-1 SP, UCM36, 36, 1 SP, UX-1 LLSP, 1 LLSP, 30LP, 36 LL, 36 LLLP, UCM36 LL

Recommended mechanical fastening method

  • Applicable

  • Not Applicable

Recessed Lacing
Recessed Lacing:
Hidden Lacing
Hidden Lacing:
Plastic Spiral Finger
Plastic Spiral Finger:
Plastic Spiral Lacing
Plastic Spiral Lacing:

  • Applicable

  • Not Applicable

Recommended Uses

Recommended use: Slider Bed

Slider Bed

Flat Rollers

Flat Rollers

Slider Beds on Both sides

Slider Beds on Both sides

Channel Trough

Channel Trough

Conventional Trough

Conventional Trough

Incline Conveying

Incline Conveying

Incline Variation

Incline Variation

Bucket Elevator

Conveyor with Accumulation

Bend Conveyor

Bend Conveyor

Knife Edge Conveyor

  • Applicable

  • Limited use

  • Not Applicable

Certifications and Lab Tests

 

Chemical Resistance Information

Category

Chemical

Results

DOWNLOAD FULL CHART

Download INO USA
Lighteight Belt catalog

Download
Lighteight Belt Catalog